A Labor of Love: The Peugeot (Part 1)

20
Jun
2014
By

vintage-peugeot-frame-soozed

It was January, 2012, when I found this frame and fork at the Madison Bike Swap. And what a bargain it was: $10 for the frame; another $3 for the fork. She was pretty dirty and there were a few marks on the frame, but I could see past that. She had good bones.

I found it right when I arrived, so I had to carry it with me for the entire time I was at the swap. As I wandered up and down the rows of tables filled with spare parts, people asked if I was selling. “Why no,” I replied.

“Nice find,” they responded.

Back home, it was time to get to work. Step 1: cleaning. Three hours, some rubbing compound, and a little elbow grease and she was shining. There were a few minor dings, but that doesn’t bother me. It shows the bike was ridden, and that’s a good thing. (That’s the result, pictured above.)

Now it was time to start collecting parts…and this is where the real fun began.

Have you ever tried to find a seatpost for a vintage Peugeot? Trust me, it’s not easy. An online search turns up some information on 24mm posts, but when contacted, no one came through. I searched on forums and through social media. No luck. The search was on.

In May, 2012, we were in New York, wandering the streets drinking morning coffee, and happened upon a bike shop that looked interesting. You know those shops where the windows are a little dingy, there’s tons of random stuff visible when you peer in, and even more when you enter? There were boxes of parts scattered around the shop floor and my spider senses tingled. Could there possibly be a 24mm seatpost among the treasures? Behind the counter sat a guy that looked like he spent a lifetime in that shop. And he had. When asked if he had such an elusive seatpost, he got up, went straight to one of those boxes and came up with not one, but two. I took them both. It would work, but would require an old-school saddle clamp. I grabbed that while we were there.

New-York-bike-shop-soozed

24mm-seatpost-for-Peugeot-soozed

I kept collecting parts: some I had; some from friends; some purchased.

By August, 2013, I finally had everything I needed – or so I thought.

peugeot-vintage-bike-soozed

There were still a few finishing touches: the @baughblabs custom chainring guard had arrived, so he drilled the chainring and installed them on a vintage Campagnolo GS crank that I found.

drilled-chainring-bike-soozed

custom-chainring-guard-campagnolo-soozed

We were ready to build. Finally. I say “we” because I was going to pretty much stand and watch him build it. Like a skilled ER nurse, I would hand off tools with precision when he requested. (Hey, that’s important too).

Nothing went as planned, and the small things were getting to be somewhat comical.

Although I loved the way it looked – and the irony didn’t escape me – the vintage Schwinn fork didn’t work. It was really set up for a 26” wheel, so long reach brakes were too long and regular road calipers were too short. An online fork purchase and a few days wait for delivery: problem solved. BUT… the threads on the steerer tube weren’t long enough, so the tube had to be threaded further – resulting in a minor scratch to the fork crown. A @baughblabs custom paint job fixed that.

We scratched the top of the bars getting them through the stem. This year’s Madison Bike Swap, a quick $10 purchase, and voila, no more scratched bars.

Almost there…

The wheels – a generous contribution to the build from a good friend – weren’t going to work for this; they were set up for a 28+ tire. After all this time, aesthetics mattered. New wheels weren’t in the budget right now. I was disappointed, but knew this was important. The build was going to wait.

But no!

@baughblabs surprised me with a set of new wheels complete with his prized vintage Campy hubs, and built by Lou at The Pony Shop in Evanston with tied and soldered spokes. Pure old school and perfect for this bike.

Vintage-Campy-Hubs-soozed

Last step, throw a chain on and go. Well, sort of.

We tried installing a new 3/32” pitch chain, but it had been so long since we bought the 44 tooth front chainring, we forgot that it was for a 1/8” pitch chain. A quick trip to The Pony Shop and that was fixed. Between the dropout and the gear ratio, it needed a half-link to fit. Another minor delay.

Time for the saddle – a new Brooks that I purchased for this bike. Bar tape. Flip-flop pedals. And…

Holy smokes. Could it be possible?

Last night – 888 days from the day I purchased the frame – she. is. finished.

Peugeot-soozed

All that’s left is the shake down cruise. But that’s another story.

Stay tuned for part two next week.

Enjoy Your Ride

Tags: , , , , , , ,

Pin It

11 Responses to “ A Labor of Love: The Peugeot (Part 1) ”

  1. Ricky on August 5, 2015 at 5:22 am

    hi there. great work. do you maybe have the second seat post ?? do you want to sell it??

  2. gswbike on June 21, 2014 at 2:55 pm

    Also, Great pics and as always a wonderful post.

  3. gswbike on June 21, 2014 at 2:51 pm

    Absolutely beautiful. Love it. Great restoration job to both BaughbLabs and yourself. Wonderful.

  4. Daniel on June 21, 2014 at 11:01 am

    This is awesome. Love all the pics, this is turning out beautiful! I remember seeing one or two of them bikes when I was younger and always dreamed of having one.
    I’ll check in here when I can, been off-grid quite a bit lately. Bike riding the Grand Canyon last week, hope to get some photos up soon-

    • Suzanne on June 21, 2014 at 1:41 pm

      Thanks Daniel. I’m so happy with the way it turned out. Looking forward to your ride pics.

  5. k pruell on June 21, 2014 at 8:52 am

    I want to build my own bike This is beautiful

    • Suzanne on June 21, 2014 at 1:42 pm

      Thanks! Good luck on the build. Let us know how it works out.

  6. John on June 20, 2014 at 8:28 pm

    Great article man. Love it

    • Suzanne on June 21, 2014 at 1:42 pm

      Thanks John. Appreciate that.

  7. Darryl is Loving the Bike on June 20, 2014 at 4:45 pm

    How did I not know you were doing this? Oh man, she’s a beauty. Sorry it wasn’t as smooth as it could have been, but I know it was totally worth it. I’m looking forward to part 2. Watch out for our adventures in bike building coming soon…….we shouldn’t have these issues with the new frames we’re using.

    • Suzanne on June 21, 2014 at 1:43 pm

      Thanks my friend. No need to be sorry…it’s all part of the experience, right? Makes it sweeter at the end 🙂

Calendar

    March 2024
    M T W T F S S
     123
    45678910
    11121314151617
    18192021222324
    25262728293031

Archives

Sugar Alternatives for Energy and Hydration

Question: I am using the homebrew sugar formulations (sometimes added to green tea).  I am also trying to wean myself off 1/2 dose adrenalean “lip tonic delivery system” (biorhythm brand- caffeine, hoodia g, synephrine, yohimbe) capsule for energy.

My question is other than juice, can you suggest modifications in lieu of table sugar for energy and hydration.

Answer:

Both raw/organic honey or agave can work great in the homebrew (substitute in the same quantities for the sugar, or to taste), but you do have to shake well in order to make sure they don’t settle out.  Have you tried either of these?  Also, make sure to use at least the minimum amount of salt recommended in the homebrew as the temps rise, you need the sodium replacement if you’re sweating.

Sports Drink Homebrew

Please send us your questions for our Expert Sports Nutritionist, Kelli Jennings to “Ask the Sports Nutritionist“. Kelli Jennings is a Registered Dietitian with a passion for healthy eating, wellness, & sports nutrition. For more information go to www.apexnutritionllc.com.

Nutrition Tips